Posts in Category: Stitch

First Sock Complete

What’s the verdict?

I hate it so much and yet I’m so proud of myself. I actually knit a sock! Surprisingly it wasn’t terribly hard either.

Here’s what I learned from this project.

  • The importance of appropriate yarn. This was super soft baby yarn made of acrylic and nylon. It has no structure to it whatsoever so it’s floppy as hell. Completely unsuitable as a sock yarn.
  • How to do short rows using the wrap and turn method. To recap, its a method to make curves, or turn a corner. I believe my short row holes look a bit bigger because of the size of the needle I used.
  • How to knit in the round using the magic loop method. I’m completely surprised how it confuddled me for two days and now I’m a champion. I’m not sure why that hole appeared in the picture below as I followed the pattern instructions exactly, but it looks like a join wasn’t made. I could stitch it up easily if I wanted.

  • How gauge is so very important to a project. Because of my stressing that the sock wouldn’t fit Jason or I due to our big feet, I upped the needle size to make a larger gauge (how many stitches per inch of knitting) which ended up making a sock even too big for Jason. The flopsy stretchy yarn did not help that in the slightest.
  • How not to freak out about “ladders” as discussed in my last post because they just worked themselves out. I learned a few tips to help minimise them.

  • Again, how important gauge is. This ribbing is much too loose to hold the sock up.
  • How bad it is when you put a provisional cast on BACKWARDS. It was hell transitioning from the toe to picking up the stitches so I could start knitting in the round.

Due to its unsuitability, I will not be making a matching sock to this guy. Jason’s a little disappointed but considering it’d last about 5 seconds on his foot in bed before falling off, he’s accepted it. I’ve promised to make him some a little later.

I picked up a sock knitting book on Amazon after finishing the sock and finding a mention of this on a blog I was reading, called Custom Socks: Knit to fit your feet, by Kate Atherley.  The handy thing about Amazon at times is they let you have a sneak peek in the book and in this case it sold me! In 5 seconds I had paid in Aussie dollars due to the Aussie Amazon Kindle site, so that was awesome, and had it delivered to my iPad’s Kindle app. I then devoured most of it immediately.

It’s got a lot of math in it about measuring feet and how to adjust any part of a sock to fit whatever quirks you may have if your feet don’t fit the “standard” or “average”. It’s extremely in depth and you can tell she has had a lot of experience. I also learned about negative ease. I should be knitting a sock pattern an inch smaller than our feet call for width-wise, due the stretch in the knitted fabric. It’s how we make the socks fit better.

And it has super cute patterns in it as well! I must knit all the socks! I was so excited that I knit up a gauge swatch (albeit smaller than I am meant to because patience is not a virtue of mine :P)

Oh how adorable this self-striping yarn that Lona sent me is. I’m unsure if the yellow gradient is purposeful or accidental, because to be honest, the dye job is not the greatest. There are little flecks of paleness on the blue where the dye didn’t touch or absorb well enough that were definitely not purposeful. But despite that, I still love this yarn. It’s strong but soft at the same time and it knit up like a dream. Because it’s made to be sock yarn, the ply of it is very tight, which is a good thing (according to the above book).

I knit the above on 2.5 mm needles and got smack bang on the gauge required for the socks I want to make from this. 8 stitches per inch and 11 rows per inch. I feel like yelling BINGO! right now.

I measured up my feet last night, both left and right according to Custom Socks, and worked out my ratios, such as foot circumference to ankle circumference, and so on, to see if I had a freaky foot or not. I grabbed this pic from KnittingDaily.com which is also in Custom Socks.

Left Foot (cm) Right Foot (cm)
Foot Circumference (A) 23.7 24
Ankle Circumference (B) 26.7 26
Gusset Circumference (C) 25.6 26
Foot Length (D) 27 27
Low Calf Circumference (E) 33 32
Heel Diagonal (F) 33.5 33
Toe Length (G) 5.1 5.1

Basically what I found is my right foot was larger than my left (knew that from trying to find shoes that fit, plus I’m right-handed, so it’s not strange) and that my left ankle was larger than my right. Also not strange as I tore two ligaments in my left ankle a decade or so ago and it has always been a bit fat since.

I also found, that even though I have large feet (size 10 women in Australia shoe sizing which is usually the largest you can buy easily in everyday shoe stores) the ratios are within normal ranges. Only one of them for the left foot ducked under the median range Custom Socks discussed, by 0.01 due to that fat ankle. So, I think, what I’ll do is knit one sock normal, try it on both feet, and if I need to, adjust the stitches at the ankle for my fatter ankle for the second sock.

Easy peasy!

In other news, I am still ploding away at the Epic Pokemon cross-stitch most nights. I’ve devoured the latest season of Fear the Walking Dead and have started The Wire, under hubby’s insistence.

Well, it’s more like “I’m not pressuring you, but you really should” type of insistence. 🙂

Until next time, have fun!

Magic Loop and Sock Knitting

I mentioned earlier that I had been playing with some new knitting skills in preparation for trying to make a pair of socks. Well….here goes. I wanted to show you what had come of that.

Firstly, why exactly was I venturing into sock knitting? Sock yarn probably has to be one of the funnest and prettiest yarn out there. There’s just tonnes of it, patterned, or ombre’d, or striped or just one colour, and then the socks themselves. You can knit them “normal” with stockinette stitch as I am doing on my first pair or you can add ribbing, or cables, patterns, multiple colours, anything you like really. There’s tonnes of different ways to knit the toe and the heel. You can start from the toe, or from the cuff around the leg. They are so so so flexible and it’s a great way to learn some new skills.

My friend in the US sent me down some more yarn; naughty, delightful Lona! She spoils me. One of the skeins was a self-striping yarn for socks. She knows me too well, it’s simple and not too gaudy as I don’t like the look of a lot of the self-striping I’ve seen. And it’s got some blue in it 🙂

So I turned it one afternoon from a skein into two equal balls, one for each sock, using this fancy ball winding machine. Let me tell you…THAT was not a fun experience. I don’t know if I was just useless, or that skein wasn’t made properly because that yarn got so utterly tangled trying to wind it. I probably spent around two hours untangling the mess.

But of course, I’m not going to waste pretty yarn before I know what to do with it, so I picked up some Paton’s Big Baby 4 ply/fingering weight at Spotlight in this graduated blue/green/yellow/white. It’s 60% acrylic and 40% nylon, so its not the same as the merino/nylon blend above but it was cheap enough and feels soft, so it shall make a cute beginner sock. It’s also a test whether 100 gams of sock yarn is enough to get a pair out for Jason and/or I because we have rather large feet. Larger than the average anyways.

Firstly, I spent part of two days learning how to make a crochet chain. Gosh I felt so awkward using that single needle with its little hook to make a chain of stitches, which I would be using to make a provisional (temporary) cast-on for my sock. It took me around 30 minutes to do it the first time, about 15 minutes the next and 5 mins the time after. Practice really does make you better. I also practiced a short row technique, using the wrap and turn method, which is a way to make curves and shape your work. It’s called a short row, because you don’t knit all the way along the row, you only go so far, wrap the yarn around a stitch, and turn your work, go back the other way, wrapping a stitch before you get the end, and turning your work. Rinse and repeat. It feels abnormal and weird when you first try it, and I managed to stuff it up completely, but from those errors my second try was better and my third try was spot on.

I used this Craftsy mini-class (it’s free!) Short Rows with Carol Feller, to teach me as well as Very Pink Knits 2 at a Time Toe Up Magic Loop Socks. Her Youtube videos are free to watch, showing you the techniques for the provisional cast-on, short row toe and heel and the stretchy bind off. If you want the pattern she uses, you do have to purchase it, which I went ahead and did. I usually don’t hand out money so easily, but what interested me was that her pattern writes out every single line so it’s easy to follow. A lot of patterns are more like “this is line 1, do it and continue this technique down to this line” and that gets a little confusing when you are a beginner.

And so, I felt ready to cast on my sock yesterday. I loaded up the video, printed out my pattern, made my crochet chain, started to cast-on and DISASTER. It was terribly hard. My crochet chain was too small and tight and I couldn’t get the stitches on. Deep breath. Start over. Make your chains bigger. Try again. Wow, it’s so much easier now. It’s working!

I found that watching the video (whatever it is) through at least once fully is the most  helpful, then try to knit along with it on the second view. Rewind whenever you need to.  I’m not ashamed I have had to watch some parts ten times if I finally get it. It feels good when you do!

Time for a sock journey. This is two days of on and off knitting. I’d probably estimate about four hours of work. Slow as a snail but immensely happy with it so far. I didn’t take any pictures during the short row toe, but I’ll take you through the “magic loop” part of the sock.

Step 1. This is our starting position, both needles pointing to the right. The working yarn joined to the ball coming from the stitches on the back needle. I’m using a set of 3.5mm needles on a cable to make a total length of 40 inches. The pattern asked for me to use 2mm needles, but as I had to increase the needle size to make socks that were big enough for our monster feet. Until the sock gets bigger I’m not sure whether they will fit me or Jason.

Step 2. You want to pull the back needle out, leaving the back half to hang out on the cable that joins the two needles. It’s called magic loop because you are using one cable to knit something in the round. Look at those loops of cable! It really is a bit like magic how it works.

Step 3. We use the needle we just pulled out, to knit those stitches on the front needle. Don’t stop now, keep going!

Step 4. We’ve now knit across that row and gotten all the stitches over to the right needle. We drop the left needle.

Step 5. Turn the work around so the needle holding the stitches is at the back.

Step 6. On the front set of stitches, pull the cable back and put those stitches onto the needle again, so that we have returned to Step 1. Ta da! You just completed half a round, and you just keep doing the same thing, going around and around.

Here’s my short rows as you can see them from the side of the toe. The wrap and turn method does leave a small hole in the fabric but as you practice more it should get smaller and this should be less noticeable after washing and blocking the sock as the yarn will adjust and fluff up a bit depending on the yarn type. I think I did a spectacular job with this. To me it looks quite neat and even and the holes are small.

I did have a freak out late last night after I had started “knitting in the round”, having joined the two sides of the toe together. I had read about ladders which form  where the sides join and the stitches can become stretched. See the picture below. You can see there’s more horizontal yarn between the stitches than normal.

When I started going around, this was more pronounced, even up to a centimetre of yarn between and I was getting anxious about it. The videos say, give it a good tug!  So I would, but it would just tighten the stitch that was on the back cable, which would make it terribly hard to get back onto a needle. Cable is so much thinner than needle!

I hopped into bed, Jason laying Monster Hunter on his 3DS beside me and started checking out some blogs and videos. Pull tight, but not too tight.  Yeaaaaaaaahhh, that’s helpful. Very Pink Knits did mention that it would probably adjust after washing in any case. I picked up a tidbit abut holding the back and front together when you knit the first two stitches, which will reduce the stresses of the cable and needles trying to pull away from each other and gave that a go in today’s knitting session. Lo and behold, that helped! As the sock got a itty bitty bit longer, the tension came off the below stitches as well and they evened up.

I find that learning knitting has helped me to become a little more patient. Not much, and not all the time, let’s be reasonable! But with last night’s stress fest, it was pretty tame to usual. I took a breath, put down my work, and went to find out what I could do about it, rather than getting cranky and throwing it down. I told myself, you’re learning and you are going to make mistakes. Learn from those. This is not something you just get the first time.

And its not. But is so damn satisfying when it works out 🙂 More so because I persevere? Unsure yet, but we’ll see!

Until next time, have fun.

Epic Pokemon Cross-stitch Update 26/07/16

Just because I haven’t posted, doesn’t mean I haven’t been crafting! I’ve been messing about with yarn a bit, learning a few new techniques, and have been prepping to try a pair of socks…..but mostly I pulled out the old Epic Pokemon Cross-stitch and have been playing with that. My latest slog at it has ticked off quite a few Pokemon, over a page and a half of A4 sized pattern, and a lot of tv show catch up while I’ve been at it. Just finished watching The Flash!

Check out these new guys below.

I must admit that the release of Pokemon Go inspired me to get back into doing this, and get out of the house and walk about 😉 Regardless of the people hatin’ on it, it’s only inspired me and that’s a good thing. I found it amusing that on the day I finished Tentacool, I hatched one out of an egg.

So, I’ve just realised that a whole bunch of the cross-stitch hasn’t been recorded, so I guess I’ll have to provide a progress report with the next one. I’m over halfway to completion which gives me the feeling that one day I’ll actually finish this!

When I returned to this project, I had it set up on the below lap frame. The aida cloth was stitched onto the cloth around those horizontal rods, and then wound up to provide a taut surface on which to stitch. What I found though, was I hadn’t put it on quite straight, so the sides were looser than the middle. It’s almost impossible to stitch on fabric that isn’t taut.

I also found that this was super unwieldy. I had used the longest horizontal rods provided so that I could get the entire width of the Pokemon cross-stitch to display, but this meant the frame was wider than my legs when I was sitting and it either kept slipping off or my arms would ache having to reach around this enormous frame and my stitching speed was abysmally slow. I eventually gave up and went back to my old round frame.

I’ll give the lap frame another go in the future with the smaller rods and see if that helps. I sure hope it does.

I better leave you for now and head into the kitchen to make my pasta sheets for chicken and mushroom ravoli for dinner (YUM!) and then I guess I’ll start on my next pokemon and queue up some Arrow episodes. 🙂

Until next time, have fun!

Mallard Scarf Complete

Hey there!

I’ve been knitting away  and a few days ago I finally finished the hubby’s scarf. Some days went really well and I made my 10 cm target, some I overshot that and some I didn’t get anywhere near. It’s really challenging knitting in winter when the days can be so cold your fingers ache and you just can’t continue.

Unlike today….which has feels like a spring day. The sun’s shining and I’ve had to take my winter UGG boots and jumper off. It was perfect to wash and block the scarf so I could hand it off.

I took a chance and set up the blocking mats out on the balcony so it would get lots of sun. As I thought, I had a bit of debris to brush off afterwards but it was worth it as it only took about four hours to dry. Way better than the five days it would probably take inside when it gets cold.

It took all nine of my blocking mats and my pins to lay this scarf out. Ignore the sad dead veggie plants/parsley that refuses to die in the background 🙂

I love the 3-2 ribbing and the slight difference in texture it provides on each side. The blocking did widen the scarf just a little and gave some definition to the rib, whereas before it was scrunched up and curling on the sides. Oh, and I noticed the wool gave off very little dye when washed for the first time, so that’s a tick!

That’s a lotta scarf! In the end I used all of the 200 gram ball and it came out at 220 cm long and 10 cm wide, though the ribbing makes it really scrunchy and stretchy.

My job complete, I handed it over to the always serious Jason, as evidenced by the photo below.

 

His comment – “It’s long. And a bit scratchy.”

(Yes, and not really…he just doesn’t wear wool and I expect it will soften with wear as well.) At least he will have a snuggly neck once this warm weather goes away and he gets to wear it!

In other knitting news I’ve been trying to learn how to do the “magic loop” method, which is knitting in the round on one circular needle….I got a little frustrated day one, but day two is going better. Hoping to get the hang of it soon so I can make the fingerless gloves I want to make, keep those cold hands warm!

Until next time, have fun!

Mallard Scarf Update

Remember this baby scarf? Well it’s grown. A lot.

The mallard scarf is now a metre in length! For the Americans I know that are reading, that’s 3.28 feet according to Google conversions.

I was aiming for 10 centimetres a day, which most days I made. Not so much the last 4 days though; there was a new patch on Final Fantasy XIV Online released a week ago which has required much playing. Must do all the new things! Yes, I’m a huge gamer nerd. It’s never been a secret 😛

I’m still continuing with my lifelines about every 10 cm of so. I was using a green yarn but it was much too thick and was distorting the stitches, so I switched to a thinner yarn and it’s made a noticeable difference.

Surprisingly I have not had to use my lifelines at all. I’ve made a little mistake here or there, namely purling instead of knitting, or knitting instead of purling but I now notice them easily and can fix them quickly. I can also knit backwards quite effectively which is so handy. These two things in itself have made me quite proud of my knitting advancement.

The lifelines have given me an incredible sense of confidence and I am just so glad I read about them. One of my knitting days I went up to 15 cm before putting in another, and only because I think I was becoming too cocky about not making any mistakes. I was probably about to jinx myself, so in went the little saviour line.

Oh! I should tell you a little story. Jason and I were lying in bed about a week ago, chatting before going to sleep, and I was telling him all about my knitting stuff, how I had learned to knit backwards and so on.

Me: “Do you know what they call it to knit backwards?”

Him: “What?”

Me: “Tink.”

Him: (Possibly the loudest groan ever) “I hate knitter humour so much.”

Me: (confused)

Him: (Sigh) “Knit backwards is tink.”

Me: (Not the fastest when it comes to jokes sometimes) (Laughing for about five minutes)

Me? I love knitter humour 🙂

I also got some more knitting loot delivered, from KnitPicks again. I was researching lace knitting and so wanted to give it a go, but I hadn’t yet gotten any yarn suitable. So I started matching patterns I wanted to do, to yarn, being smart enough to write it down in a notebook because if a box of yarn turned up, I wouldn’t remember what I was going to do with each.

Here’s a picture of all the types and colours I got. There’s more but it’s just duplicates. I got some more sock yarn in two newly released colours, some merino wool, some baby alpaca, some acrylic and acrylic wool blends, which actually feel deliciously soft, unlike my starter green acrylic yarn I hated with a vengeance.  Oh and a linen cotton blend. I am highly convinced I could fall asleep in that big box of scrumptious yarn.

I also tried to go outside my usual realm of blue, blue and more blue. I succeeded!

Remember when I thought I wouldn’t need any/many more needles? So…it turns out I was wrong and I needed much thinner ones for sock knitting with the yarns I had bought at a previous time. I also don’t know which method of sock knitting I like yet, whether using several double pointed needles, or a circular needle….so I just prepared for all possibilities.

And with that, I must leave you until and continue on with the mallard scarf, so that soon I can go play with the rest of my yarn.

Until next time, have fun!